2020年细胞力学热点回眸

 概述了2020年细胞力学研究的热点和进展，探讨了细胞膜表面张力、细胞粘附力、细胞弹性模量、细胞与纳米颗粒相对刚度等对细胞生物学行为的影响及其在疾病诊疗中的应用。     

数字化创新:回顾与展望

结合数字化创新的特征与发展趋势,基于5W2H的分析思路,本文从数字化创新特征(WHAT)、数字化创新研究时间线(WHEN)、数字化创新场景(WHERE)、数字化创新动因(WHY)、数字化创新参与者(WHO)、数字化创新途径(HOW)以及数字化创新代价(HOW MUCH)七个方面对数字化创新相关文献进行了梳理.研究发现,现有研究缺乏对数字化创新动机、内在机理、影响结果等方面的深度挖掘与分析,未来数字化创新的研究方向应更加关注数字化创新的跨领域研究、数字化创新的跨层次分析、数字化创新的本土化研究、数字生态系统研究等.     

基于长期实测的南京栖霞山长江大桥车辆荷载分析

为准确掌握南京栖霞山长江大桥车辆荷载的统计特性及变化规律,基于该桥动态称重系统记录的2014-2016年数据,研究各车道上不同轴数车辆的分布特点及变化规律,并分析不同轴数车辆各轴轴质量随车质量的变化规律.采用K-means聚类方法对同轴数车辆进行分类,将各类型车辆的轴距、轴质量参数与现行标准进行比较.结果 表明:在大桥所有通行车辆中,二轴车辆为主要类型且所占比例逐年增加,到2016年其通行数量占通行车辆总数的比例为87.42％;5种不同轴数代表车辆中二轴、六轴车辆参数与现行标准相近,与现行标准中三轴、五轴车辆参数相近的车辆不是桥上主要通行车辆类型;各轴数车辆代表轴质量均在轴荷载允许限值内.     

干湿循环和吸力对非饱和下蜀土力学特性影响的试验研究

为研究干湿循环和吸力共同作用对非饱和下蜀土力学特性的影响,选取镇江某边坡的下蜀土为研究对象,通过非饱和直剪试验,对不同干湿循环次数及吸力水平下下蜀土力学特性的变化规律进行了研究.结果 表明:随着干湿循环次数的增加,下蜀土表面裂隙明显增加并具有不可逆性;下蜀土的抗剪强度经短暂增大后逐渐降低,并在第4次干湿循环作用后趋于稳定;下蜀土的黏聚力在经历短暂提高后逐渐降低并趋于稳定,而其内摩擦角则随干湿循环次数的增加变化幅度较小,呈上下波动态势;相同干湿循环次数下,吸力的存在对于下蜀土的黏聚力具有提升作用,而对土体内摩擦角的影响则不明显.研究结果可为干湿循环作用下下蜀土边坡的稳定性分析提供计算参数,具有实际工程意义.     

基于动态阈值的混凝土裂缝高抗噪提取及识别方法

针对表面布有蜂窝麻面等复杂噪声的混凝土裂缝,提出了一种基于动态阈值的混凝土裂缝高抗噪提取方法.首先,通过灰度变换、高斯滤波、信息增强等技术弱化、去除噪声,增强图像中裂缝的亮度,提高裂缝与背景的对比度;然后,采用OTSU阈值分割算法去除伪裂缝,基于裂缝与干扰噪声面积的差异,引入动态阈值,实现各类型裂缝的提取;最后,基于边缘检测和裂缝骨架细化处理,计算裂缝的长度、宽度和面积3项特征参数.基于室内实验和室外实际桥梁拍摄的4组裂缝图像结果表明,4组裂缝的平均宽度分别为2.01、1.07、1.34、0.97 mm,说明该方法适用于不同背景下各类型裂缝的提取,具有较强的鲁棒性.     

Guaranteed Cost Finite-Time Control of Fractional-Order Nonlinear Positive Switched Systems with D-Perturbations via MDADT

This paper is concerned with the problem of guaranteed cost finite-time control of fractionalorder nonlinear positive switched systems(FONPSS) with D-perturbation. Firstly, the proof of the positivity of FONPSS with D-perturbation is given, the definition of guaranteed cost finite-time stability is firstly given in such systems. Then, by constructing linear copositive Lyapunov functions and using the mode-dependent average dwell time(MDADT) approach, a static output feedback controller is constructed, and sufficient conditions are derived to guarantee that the corresponding closed-loop system is guaranteed cost finite-time stable(GCFTS). Such conditions can be easily solved by linear programming. Finally, an example is provided to illustrate the effectiveness of the proposed method.     

Detecting MoS2 and MoSe2 with optical contrast simulation

Optical imaging is a promising method to identify and locate 2D materials efficiently and non-invasively. By putting a 2D material on a substrate, the nanolayer will add to an optical path and create a contrast to the case when the nanolayer is absent. This optical contrast imaging can be used to identify the 2D material and its number of layers. To make the optical imaging process in the laboratories an effective tool, Fresnel Law as a model was used to simulate the optical imaging results of 2D materials(graphene, Mo S2 and MoSe_2) on top of different thickness of SiO_2 and Si wafer in the present investigation. The results provide the details of the optimal conditions(optimal light wavelength and optimal SiO_2 thickness) to identify and locate single to few 2D nanolayers, which can be used directly in laboratories. The optical contrasts of 1–5 layers of molybdenum disulfide(MoS_2) and molybdenum diselenide(MoSe_2) were simulated. To the best of our knowledge, it is the first time that the optical contrast results of MoSe_2 have been reported. In particular, this work highlights the sensitivity of the model on the accuracy of the refractive indices used. It is demonstrated that through computational modeling that optical contrast can allow effective determination of number of layers in few layer 2D materials.     

Mechanical behavior of a near α titanium alloy under dynamic compression: Characterization and modeling

Dynamic compression tests under strain rates from 870 s^?1 to 2100 s^?1 were conducted for a near α Ti–8Al–1Mo–1V titanium alloy with equiaxed microstructure. Compression behavior, adiabatic shearing and band microstructure were investigated via characterization and calculation. The results demonstrate that all dynamic constitutive curves exhibited obvious stress fluctuation phenomenon with double increase-decrease changing stages at the primary stage of compression. The dislocation multiplication theory can be used to explain this phenomenon. After the stress fluctuation period, work hardening coexisted with the thermal softening, resulting in the slow hardening tendency in constitutive curves. J-C model was utilized to quantify the dynamic constitutive curves. The deviations between the predicted and experimental curves under high strain rates may be attributed to the over-consideration of thermal softening effect in J-C model. Adiabatic shearing band (ASB) began to form under the strain rate of 2100 s^?1. A total shearing strain of 8.1 within ASB achieved in 8.9 μs, corresponding to a local strain rate of about 9.1 × 10⁵ s^?1 and is over 430 times of the macro strain rate. Post annealing was conducted on ASB before EBSD characterization. Due to the static recrystallization during annealing, the α phase within ASB generally presented as ultra-fine grains less than 1 μm in diameter.     

Theoretical and experimental design of Pt-Co(OH)_2 electrocatalyst for efficient HER performance in alkaline solution

Design efficient electrocatalysts become significant for the hydrogen evolution reaction (HER) in alkaline solution.Here,the HER performance on Pt-Co(OH)2 has been investigated by using DFT calculations.Compared with pure Pt,the Pt-Co(OH)2 shows excellent hydrogen binding energy (-0.29 eV) and hydrogen adsorption free energy (0.02 eV).More strikingly,the water dissociation process on Pt-Co(OH)2 is an exothermic reaction while that of Pt is an endothermic reaction,demonstrating that the Pt-Co(OH)_2 is an excellent catalyst for HER in alkaline medium.Then the two-step electrodepositions was used to fabricate Pt-Co(OH)2 on the carbon paper (CP).The Pt-Co(OH)_2/CP shows the lowest overpotential of only 37.6 mV at a current density of 10 mA cm~(-2) in 0.1M KOH,the smallest Tafel slope of58 mV dec~(-1) and the good stability for 20000s without obvious degradation.     

民航飞机客舱乘务员应急处置能力分析

为提高民航飞机客舱乘务员应急处置能力,根据专家访谈和相关规章,选取了22项民机客舱乘务员应急处置能力指标。通过编制问卷进行调研,使用SPSS22.0对问卷统计数据进行信度、效度检验及因子分析得到旋转后的各指标的因子载荷,从中提取4个二级指标,并根据各自特点依次命名为基本素质、知识基础、职业技能、处置能力。根据指标体系建立民机客舱乘务员应急处置能力结构方程模型,提出假设模型。使用AMOS24.0对假设模型进行验证和拟合优度检验,最后根据各指标标准化路径指数计算得到各指标的权重。结果表明：对乘务员应急处置能力影响最大的是基本素质,然后依次为处置能力、职业技能、知识基础。